Select Page
Wall-Mounted Swing-Up Grab Bar

Wall-Mounted Swing-Up Grab Bar

by | Aug 25, 2021

Grab bars have been designed and tested to withstand 226 kg (500 lbs) downward pull when properly installed. This exceeds HUD, HEW, FHA, VA, and other Federal, State, and local codes, including the Americans with Disabilities Act (ADA).
Two-Wall Horizontal Grab Bar

Two-Wall Horizontal Grab Bar

by | Aug 25, 2021

38 mm (1-1/2″) diameter tubing. Satin-Finish, slip-resistant surface stainless steel grab bar for bath/shower/toilet compartment. Snap Flange. Add .99 for peened surface. Available finishes: B-68616 Satin B-68616.99 Satin, peened
WingIt™ Grab Bar Fastener

WingIt™ Grab Bar Fastener

by | Aug 25, 2021

For 65 and 90 mm (2 1/2″ and 3 1/2″) or deeper hollow walls with finished wall surfaces 6 to 38 mm (1/4″ to 1 1/2″) thick. Corrosion resistant stainless steel. One required for each flange. Fastener will support 136 kg (300 lbs) load. WingItTM...
Two-Wall Toilet Compartment Grab Bar

Two-Wall Toilet Compartment Grab Bar

by | Aug 25, 2021

38 mm (1-1/2″) diameter tubing. Satin-Finish, slip-resistant surface stainless steel grab bar for bath/shower/toilet compartment. Snap Flange. Add .99 for peened surface. Available finishes: B-6897 Satin B-6897.99 Satin, peened
Optional Mounting Kit for Grab Bars

Optional Mounting Kit for Grab Bars

by | Aug 25, 2021

Mounting Kit consists of 3, #14 x 2 1/2″ type-304 stainless steel, round-head, sheet-metal screws. One required for each flange.