Select Page

Grab Bar Rail with Padded Back Bar

Grab bar shall be Type-304 stainless steel with satin finish. Grab bar shall have 18-gauge 1.2mm (18-gauge) wall thickness and 30mm (1-1/4″) outside diameter. Clearance between the grab bar and wall shall be 210mm (8-1/4″). Concealed mounting flanges shall be 3mm (11-gauge) stainless steel plate, 50 x 80mm (2″ x 3-1/8″), and equipped with six screw holes for attachment to wall. Flange covers shall be 0.8mm (22-gauge) stainless steel, 85mm (3-1/4″) diameter, and shall snap over mounting flanges to conceal mounting screws. Ends of grab bar shall pass through concealed mounting flanges and be heliarc welded to form one structural unit. Grab bar shall be equipped with a 360 x 160 x 40mm (14-1/4″ x 6-3/8″ x 1-5/8″) white polyurethane integral foam backrest.

Technical Data Sheet

Accessory Options & Replacement Parts

Ordering Replacement Parts

Bobrick is here to help you keep your products in good working order with the right Replacement Parts for products installed in your building. We invite you to find the part you need here.



Spec Downloads

Need a Rep?

Subscribe to receive our regular email updates.

We take your privacy very seriously. No Spam. See our Privacy Terms here.


Privacy & Terms

© 2023 Bobrick Washroom Equipment, Inc. All rights reserved